Manufacturer · Luoyang, ChinaExport & OEM support worldwide

sales@yuboo.com English

Micro-Vickers · automatic turret / Hardness testing

HV-1000ZAutomatic Turret Micro-Vickers Hardness Tester

A micro-Vickers tester with automatic turret and 10–1000 gf load range.

SteelCast ironAluminiumCopper alloysCoatings Application-specific configuration
Hardness testing
HV-1000Z
HV-1000Z automatic turret micro-Vickers hardness tester YuBoo Instrument / Luoyang, China

01 / Why this configuration

Built around a real measurement decision.

The HV-1000Z uses an automatic turret to switch between objective and indenter. It measures micro-Vickers hardness on small parts, coatings, and case-depth sections.

A micro-Vickers tester with automatic turret and 10–1000 gf load range. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.

Automatic turret
10–1000 gf loads
5–5000 HV
XY stage 100 × 100 mm
Digital eyepiece
Built-in printer

02 / Configuration

Key specifications.

Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.

Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.

Request a configuration
Loads10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000 gf
Range5–5000 HV
TurretAutomatic
Objectives10× / 40×
Stage100 × 100 mm
Max height120 mm
Dimensions530 × 290 × 490 mm
Weight45 kg

Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.

03 / Where it fits

Applications and materials.

Hardness testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.

See how we support the installation
  • Case depth
  • Coatings
  • Thin sections
  • Weld zones
  • Small parts

Typical materials

SteelCast ironAluminiumCopper alloysCoatings

If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.

Before you specify

HV-1000Z — practical answers.

Still deciding? Send the material and the measurement target — we will reply with a practical next step.

Ask an application engineer
What is the HV-1000Z used for?

A micro-Vickers tester with automatic turret and 10–1000 gf load range. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.

Which materials and sample forms does the HV-1000Z cover?

Typical materials: Steel, Cast iron, Aluminium, Copper alloys. Typical tasks: case depth, coatings. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.

What are the key specifications of the HV-1000Z?

Starting point: loads 10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000 gf; range 5–5000 HV; turret Automatic. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.

How is the configuration confirmed before ordering?

Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.

Put it to work

Configure HV-1000Z around your material.

Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.