Strain measurement · UTM accessory / Mechanical testing
ExtensometerStrain Extensometer
Clip-on, axial and high-temperature extensometers for strain and elongation measurement on universal testing machines.
Extensometer
YuBoo Instrument / Luoyang, China
01 / Why this configuration
Built around a real measurement decision.
An extensometer measures the change in gauge length during a tensile or compression test. The type, gauge length, travel and temperature range are selected around the specimen, the test standard and the UTM controller.
Clip-on, axial and high-temperature extensometers for strain and elongation measurement on universal testing machines. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Type | Clip-on, axial or high-temperature (selected by application) |
|---|---|
| Measurement | Strain / elongation |
| Gauge length | Confirmed against the specimen and standard |
| Travel | Confirmed against the test method |
| Compatibility | Universal testing machine and controller |
| Output | Matched to the UTM electronics |
| Configuration | Confirmed at quotation |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Mechanical testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Tensile strain measurement
- Yield and elongation
- Modulus determination
- Test-bar verification
- High-temperature testing
- Procedure qualification
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
Extensometer — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the Extensometer used for?
Clip-on, axial and high-temperature extensometers for strain and elongation measurement on universal testing machines. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the Extensometer cover?
Typical materials: Steel test bars, Cast iron, Aluminium alloys, Welded specimens. Typical tasks: tensile strain measurement, yield and elongation. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the Extensometer?
Starting point: type Clip-on, axial or high-temperature (selected by application); measurement Strain / elongation; gauge length Confirmed against the specimen and standard. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure Extensometer around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.