Manufacturer · Luoyang, ChinaExport & OEM support worldwide

sales@yuboo.com English

Low temperature · +30 to −60 °C / Mechanical testing

DWC-60Impact Specimen Low-Temperature Bath

A compressor-cooled bath for conditioning Charpy impact specimens from +30 °C down to −60 °C.

Steel impact specimensCast ironAluminium alloysWelded jointsHeat-treated components Application-specific configuration
Mechanical testing
DWC-60
DWC-60 low-temperature bath for impact test specimens YuBoo Instrument / Luoyang, China

01 / Why this configuration

Built around a real measurement decision.

The DWC-60 brings impact specimens to the required test temperature and holds them there before transfer to the pendulum. A circulating bath and digital timer keep the conditioning step repeatable.

A compressor-cooled bath for conditioning Charpy impact specimens from +30 °C down to −60 °C. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.

+30 to −60 °C control range
±0.5 °C stability
Compressor cooling
Specimen basket for more than 60 bars
Digital timer 1–99 min
Low-temperature impact conditioning

02 / Configuration

Key specifications.

Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.

Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.

Request a configuration
Temperature range+30 to −60 °C
Stability±0.5 °C
CoolingDual compressor, circulating bath
Working volume120 × 120 × 70 mm
Specimen capacity>60 bars (10 × 10 × 55 mm)
Timer1–99 min
CoolantEthanol or non-freezing fluid
Power220–240 V / 1.5 kW

Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.

03 / Where it fits

Applications and materials.

Mechanical testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.

See how we support the installation
  • Charpy low-temperature conditioning
  • Impact specimen cooling
  • Sub-zero impact tests
  • Heat-treatment comparison
  • Welded joint toughness
  • Laboratory specimen preparation

Typical materials

Steel impact specimensCast ironAluminium alloysWelded jointsHeat-treated components

If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.

Before you specify

DWC-60 — practical answers.

Still deciding? Send the material and the measurement target — we will reply with a practical next step.

Ask an application engineer
What is the DWC-60 used for?

A compressor-cooled bath for conditioning Charpy impact specimens from +30 °C down to −60 °C. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.

Which materials and sample forms does the DWC-60 cover?

Typical materials: Steel impact specimens, Cast iron, Aluminium alloys, Welded joints. Typical tasks: charpy low-temperature conditioning, impact specimen cooling. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.

What are the key specifications of the DWC-60?

Starting point: temperature range +30 to −60 °C; stability ±0.5 °C; cooling Dual compressor, circulating bath. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.

How is the configuration confirmed before ordering?

Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.

Put it to work

Configure DWC-60 around your material.

Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.